Wet Blasting for Accurate Surface Treatment of Surgical Instruments, Prosthetics, and Medical Implants
Compared to other surface treatments, the surface treatment of medical implants, prostheses, and surgical equipment is far more delicate because these are unique parts that come into contact with living flesh. To reduce hazards such as tissue rejection in following stages, it is imperative to clean the surface and attain the appropriate RA level with little consumable material embedding and sinking. Because of the balancing impact of water, surface contamination from consumable material embedding and sinking is virtually nonexistent during the wet blasting surface roughening and cleaning operation. With wet sandblasting, The consumable material is treated more uniformly on the surface thanks to the influence of water. When compared to dry blasting, there is a 40% reduction in the wear and deterioration of the consumable material—a costly commodity. Wet blasting can produce far more accurate outcomes and reduce the amount of items that are scrapped for operations that call for assured treatments. Wet blasting avoids the issue of fingerprints sticking on components after processing, which is frequently seen with dry blasting.
Medical Sandblasting , Medical Wet Blasting , Medical Wet Sandblasting
ST1 Compact Manual Wet Sandblasting Machine for Medical Industry
Our patented machines are made from 100% stainless steel !
Outer Sizes : 900 mm x 1300 mm x 1800 mm (h)
Cabinet Interior Sizes: 800 mm x 800 x 800 mm (h)
PLC Touchscreen Monitor: Standard
Blasting System : Manual
Process Capacity : 3-4 m2/hour
# Rotary Tables: Optional
Rotary Table Carriage System : Optional
Loading / Unloading Door : Manual
# Nozzles : 1
Rinse Tank / Pool / Bench : Optional
Slurry Media Discharge : Automated
A dust-free and healthy blasting experience is offered by the wet blasting technique in conjunction with the sophisticated filtration system. The basic operating principle can be described as processing parts that can be held and rotated with one hand using a wet blasting nozzle held in the other hand inside the cabin. The environmentally friendly wet blasting equipment guarantees quick processing of components that fit within the cabin and can be easily turned around. In addition to safely deburring items, this equipment can be used to clean and prepare surfaces for coating. Because of its small size, our entry-level model, the ST1 Wet Blasting Machine, is favored in industries including rubber, medical, automotive, and additive manufacturing (3D). In the automobile industry, it is particularly dependable for the revision and cleaning of aluminum engine parts, enabling their safe reuse.
ST12 Automated Wet Blasting Machine with Drum
Our patented machines are produced from 100% stainless steel.
External Dimensions: 1000 mm x 1000 mm x 1750 mm (h)
Cabinet Dimensions: 500 mm x 500 mm
PLC Touch Screen: Standard
Sandblasting System: Fully Automatic
Process Capacity: 7-8 m2/hour or 20 kg/hour
Number of Drums and Diameter: 1 piece 270 mm
Drum Capacity: 2 kg
Programmability Feature: Yes
Loading Cover System: Manual
Number of Nozzles: 1 Piece
Washing Pool: Standard
Sand Discharge System: Fully Automatic
It offers a dust-free, healthy sandblasting experience thanks to its aqueous spray system and advanced filter system. It ensures that parts that are difficult to handle by hand are automatically sandblasted. Drum rotation speed, sandblasting and pump pressure can be adjusted and a recipe can be created for each part. Our fully automatic drum wet sandblasting machine, which allows working with various consumables, helps sensitive and delicate parts, especially in the defense industry, medical and jewelry sectors, to reach the desired RA level before vibration, electropolishing and coating processes.
ST4 Automated Dental Implant Wet Sandblasting Machine
Our patented machines are made from 100% stainless steel !
Outer Sizes : 1250 mm x 1550 mm x 1850 mm (h)
Cabinet Interior Sizes : 800 mm x 700 x 700 mm (h)
Blasting System : Full Automated
PLC Touchscreen Monitor : Standard
Process Capacity : 7-8 m2/hour or 240 pieces/hour
İ# Implant per Process: 1
Process Tine : 15 seconds
Programming Feature : Available
Loading / Unloading Door : Double Manuel Side Door and 1 Front Door
# Nozzles : 2
Slurry Media Discharge System : Automated
In no more as 15 seconds, it makes it possible to automatically wet blast tiny objects, such as dental implants. Compared to dry blasting, wet blasting not only assures accurate results on fragile surfaces but also protects underlying layers. Unlike manual blasting systems, it enables for constant output quality because the operator is only involved in putting and removing the pieces throughout the blasting process. Either a right-angled or an inclined-angled pair of nozzles guarantee even processing of the whole surface. Its programming function enables the design of processing recipes and modifications to the processing time and rotation speed. Our machine's modest size allows it to fit easily into the workspace without imposing physical limits. It is specifically developed for surface treatments in the medical sector and small circular items.
ST7 Automated Double-Drum Wet Blasting Machine (For Higher Capacity)
Our patented machines are made from 100% stainless steel !
Cabinet Interior Sizes : 1200 mm x 1000 x 850 mm (h)
PLC Touchscreen Monitor: Standard
Process Capacity : 7-8 m2/hour or 20 kg/hour (customizable)
Programming Feature: Available
Loading Door : Double Manual
# Nozzles : 2
Rinsing Tank: Standard
Slurry Media Discharge System : Automated
The wet spraying / blasting system, in conjunction with the advanced filter system, offers a dust-free and hygienic blasting experience. The ST7 is an expanded dual-drum variant of our fully automated drum model. The device is a highly efficient machine designed to enhance the capacity of workplaces that handle large volumes of work. The dual nozzle system is capable of concurrently operating two distinct drums with distinct recipe configurations, enabling the simultaneous processing of different parts and resulting in time savings. The drum diameter and material can be modified based on the characteristics of the parts undergoing processing. The system enables the processing of challenging components by utilizing a range of consumables, including glass beads, aluminum oxide, and ceramic beads.
ST10 Automated Drum and Manual Rotary Table Wet Blasting Machine (For Higher Capacity)
Our patented machines are made from 100% stainless steel !
Outer Sizes : 2500 mm x 1507 mm x 1882 mm (h)
Cabinet Interior Sizes : 1200 mm x 1000 mm x 850 (mm) (h)
PLC Touchscreen Monitor: Standard
Blasting System : Manual and Fully Automated Drum
Process Capacity : 10-12 m2/hour
# Rotary Table and Diameter : 1
Rotary Table Weight Capacity 250 KG
Rotary Table Carriage System : Standard Manual
# Drum and Diameter : 1, 560 mm (customizable)
Drum Weight Capacity: 12 kg (customizable)
Loading Side Door : Double Manual Door
# Nozzles : 2 Pieces
Rinsing Tank : Standard
Slurry Discharge System: Automated
The wet blasting / spraying system, in conjunction with the advanced filter system, offers a dust-free and health-conscious blasting experience. The dual-function wet blasting machine is capable of processing both small parts that present handling challenges and larger parts that require processing on the rotary table. The dual functionality of the product makes it a preferred choice for businesses that have limited physical space. This model is highly preferred in the aerospace, defense, and automotive sectors.
ST25 Satellite Type, 4-Axis Wet Blasting Machine for Long Prothesis
Our patented machines are made from 100% stainless steel !
Outer Sizes : 1700 x 2100 x 2900 (mm)
PLC Touchscreen Monitor: Standard
Blasting System : Fully Automated
Process Capacity: 10-12 m2/hour
# Rotary Table: 4-Section Automated Rotary Table Mechanism
Rotary Table Weight Capacity: 5 KG (customizable)
Loading Door : Automated
# Nozzles: 3
Slurry Discharge System: Automated
Rinsing System: Optional
The automated rotary table movement enables the loaded component to undergo wet blasting of its external and internal diameters by rotating on its axis and transitioning between various workstations. The parts are loaded into the system one by one under the supervision of an operator and are then retrieved from the loading area once the entire process is completed. In order to automate these systems and reduce the reliance on operator support, it is possible to integrate a robotic arm loading system. The dimensions of the cabinet are determined based on the vertical measurement of the component. This specific model is highly favored for the process of propelling projectiles into barrels within the defense and arms sector. In order to attain the desired RA value, it is possible to utilize glass beads and aluminum oxide, fused aluminium as consumable materials.