ST400 Jet-Pulse Self Cleaning Dust Collector - Filtering Machine
DOuter Sizes : 550 mm x 550 mm x 1850 mm (h)
Made from metal sheets
The filter cartridge is a Jet Pulse low-porosity (1 micron) filter.
The filtration system driven by a 7.5 kWh 3000 RPM motor comprises of a self-cleaning unit and a filter unit with one filter cartridge.
Filter cartridges are one of those replacement parts that wear out quickly from use. It is possible to see dust emissions if they are not routinely serviced or replaced. Make sure your workspace is free of dust by changing your filter cartridges on a predetermined schedule.
ST401 Jet-Pulse Self Cleaning Dust Collector - Filtering Machine (Higher Performance)
Outer Sizes: 1000 mm x 1000 mm x 1850 mm (h)
It is made from metal sheets.
A low-porosity (1 micron) Jet Pulse filter cartridge is used.
The 7.5 kWh 3000 RPM motor-powered variable-speed filtration system consists of a filter unit with 4 filter cartridges and a self-cleaning unit.
Filter cartridges fall into the category of quickly wearing spare parts due to usage. If not replaced or maintained regularly, dust emissions can be observed. To ensure a dust-free working environment, replace your filter cartridges at specified intervals
TTH400 Stainless Steel Dust Collector Reservoir
External Dimensions: 400 mm x 400 mm
This eco friendly system captures dust particles small enough to pass through the filter mesh in its water, ensuring filtered air is returned to the environment. Since the system contains water in its reservoir, it is made of 100% stainless steel material. Thanks to its wheeled legs and small size, it is designed to be taken to the discharge area and easily cleaned by emptying the dirty water solution through the discharge valve. If requested, it can be either supplied together with the machine or supplied as a seperate system with external filter system.